Custom Gaskets, Filters, Barriers, and Insulators

Seal, Shield, and Protect Your Device in Any Environment.

Gaskets, filters, barriers, and insulators are the components that keep an electronic device sealed, shielded, and protected, whether it is a membrane switch, a control panel, a medical instrument, or rugged industrial equipment. They defend the finished product against dust, moisture, impact, and electrical interference so it performs reliably in the real world.

As a custom gasket, filter, and barrier manufacturer, Butler Technologies designs and cuts each component to your exact application, from IP67 sealing gaskets to EMI/RFI shielding filters and abrasion-resistant barriers.

We are committed to offering the highest-quality user interface devices, including gaskets, filters, barriers, and insulators, which can enhance the performance and durability of your membrane switch or control panel.

Our sealing, shielding, and protection components include:

Exploded view of gasket, filter and barrier layers in a control panel

SEALED, SHIELDED, OR BOTH?

Die-cut gasket frame for a membrane switch

Gaskets

Gaskets create a seal between the control panel device and the mounting surface, preventing dust, dirt, and moisture from entering the switch. A gasket for a membrane switch or control panel also protects against humidity, temperature fluctuations, and chemical exposure, ensuring long-term reliability. As a custom gasket manufacturer, we produce sealing, adhesive, and rubber gaskets in the shapes, sizes, and materials your application requires.

We understand the importance of device protection. Our gaskets can be rated to IP67 standards. To achieve an IP67 rating, which indicates complete protection against dust and immersion in water up to 1 meter deep for 30 minutes, a minimum of .125” of 3M 200MP adhesive is required around the circuit.

Filters

While filters also protect against dust and moisture, they can be used for airflow and light management. Filters control the amount and type of light passing through the switch, which is important in applications where visibility is critical, and they can be used as inserts to collect dust and debris and prevent interference inside your device.

Custom filters for a membrane switch or control panel are also highly effective at protecting your device from electromagnetic interference (EMI) and radio frequency interference (RFI), which can cause malfunction or performance degradation in sensitive electronics. Each filter is designed and cut specifically for your application for a perfect fit and maximum protection.

Laser cutting machine cutting filter material
Barrier layer behind a graphic overlay in a control panel

Barriers

Barriers protect the membrane switch from physical damage such as impact or abrasion, and can also protect your components during transport. Like filters, barriers provide EMI and RFI protection. 

Made from durable materials resistant to wear and tear, barriers keep your switch protected against abrasion, interference, and harsh environments.

NOT SURE WHICH GASKET, FILTER, OR BARRIER YOU NEED?

Insulators

Insulators add electrical and thermal protection inside your device, guarding against shorts, heat, and static discharge. We produce dielectric insulators, flame-retardant insulators, and ESD shields cut to your specifications, and can apply dielectric (insulating) inks in our printed products, so sensitive components stay protected without adding bulk to your assembly.

Custom filters for a membrane switch or control panel are also highly effective at protecting your device from electromagnetic interference (EMI) and radio frequency interference (RFI), which can cause malfunction or performance degradation in sensitive electronics. Each filter is designed and cut specifically for your application for a perfect fit and maximum protection.

Die-cut insulator sheet with cutouts

Precision Cutting Methods

We specialize in several cutting methods to ensure a precise fit for your gaskets, filters, and barriers, including:

Materials

Gaskets, filters, and barriers can be produced from a wide range of materials to match your environment and performance needs, including:

  • Closed-cell foam and neoprene for sealing and cushioning
  • Rubber and adhesive gasket materials, including 3M 200MP adhesive for IP67 sealing
  • Polyester (PET) films for filters and insulators
  • Copper and aluminum for EMI/RFI shielding
  • Flame-retardant and dielectric materials for insulators

Applications & Uses

Custom gaskets, filters, barriers, and insulators are used wherever a device must stay sealed, shielded, and protected, including:

  • Medical devices
  • Industrial control units and control panels
  • Consumer electronics and white goods
  • Outdoor and rugged equipment in harsh environments
  • Membrane switches and user interface devices

NEED CUSTOM GASKETS, FILTERS, OR BARRIERS?

Industries We Serve

Our products and capabilities support a wide range of industries, each requiring precise manufacturing, reliable performance, and consistent quality across every application.

Why Choose Butler Technologies

ISO 9001 Certified

On-Time Delivery

Design to Production

Supply Chain Simplified

Expert Team

Custom Capabilities

EVERY CLAIM ABOVE IS AUDITED

What Our Clients Say

Frequently Asked Questions

What is the difference between a gasket, a filter, and a barrier?

A gasket seals out dust and moisture, a filter manages airflow, light, and EMI/RFI while blocking debris, and a barrier protects the switch from physical impact and abrasion. Many devices use a combination of all three.

An IP67 gasket gives complete protection against dust and immersion in water up to 1 meter deep for 30 minutes. We achieve it with a minimum of 0.125″ of 3M 200MP adhesive around the circuit.

Laser cutting uses a focused laser beam to cut material to tight tolerances without hard tooling. Because no die is required, it is fast and ideal for intricate shapes and prototyping.

Die cutting uses a shaped die to cut a material into a precise, repeatable shape. It is efficient for high-volume gaskets, filters, and barriers where the same profile is produced repeatedly.

Shear cutting uses two blades passing each other, like a guillotine or industrial scissors, to slice material along a straight line. It produces clean, burr-free straight edges quickly and economically, which makes it best for simple shapes such as strips, squares, and rectangles rather than intricate profiles.

Yes. Our filters and barriers can be built to shield sensitive electronics from electromagnetic (EMI) and radio frequency (RFI) interference that can cause malfunction or performance loss.

Depending on the application, we use closed-cell foam, neoprene, rubber, polyester film, copper, or aluminum for shielding, and high-performance adhesive gasket materials such as 3M 200MP.

It depends on the method. Laser cutting generally produces finished cut features within plus or minus 0.002 inches, with cut to print tolerance of plus or minus 0.005 inches. Die cutting ranges from plus or minus 0.010 inches on materials 0.020 inches thick or less, to plus or minus 0.015 inches on thicker materials, with typical cut to print tolerance of plus or minus 0.010 inches. Drag knife plotter cutting typically holds plus or minus 0.005 inches.

Laser cutting holds the tightest tolerances and requires no hard tooling, which makes it well suited to prototyping and to expediting first parts. Die cutting suits established higher volume work. Drag knife plotter cutting is the right choice for heat sensitive materials or materials that emit toxic fumes when lasered, such as PVC.

Yes. Replacement gaskets and insulators are frequently sourced from an existing part rather than a print. We study the sample to determine how best to recreate it in terms of design and function, and make it production ready in the process.

Closed-cell foam, neoprene, copper, aluminium, polyester and a wide variety of other materials, cut to fit almost any application.

Where to start

With all the different customization options and use cases, it might seem overwhelming.
Contact our expert team today and take the pressure off yourself.

Download the Guide

The Science and Art of Color Matching white paper cover

Download the White Paper

Rubber Keypad Data Sheet cover

Download the Data Sheet

Enhancing Membrane Switch Design case study cover

Download the Case Study

The Ultimate Membrane Switch Design Guide cover

Download the Design Guide

Reverse Engineering Instrument Dials case study cover

Download the Design Guide

Medical-Grade Smart Label case study cover

Download the Case Study

Metal Nameplate Alternative case study cover

Download the Case Study

The Ultimate Graphic Overlay Design Guide cover

Download the Design Guide